Table of Contents
Advertisement
9.3.8.4.
Network Share Settings
•
Navigation: Log in as an administrator. From Home Screen, click "Config" button in top right corner, then click "Server
Settings" in left column menu. In the Server Settings sub-menu on the main window of the page, click "Network Share
Settings".
1
Location
Workgroup
Username
Password
Create the
Folder
Test
Click "Apply" at the bottom-right of the page to save modified settings.
© 2014 Wirepath Surveillance
1
Network path of the Samba/network share server and share name. The server must be identified by its
IP address and followed by the network share name. Example: \\192.168.0.250\JonesFolder".
(Optional, may be left blank) Enter the Work Group name for the Network Share server.
Enter the Network Share server account username.
Enter the Network Share server account password.
Select Yes to have a new folder created to contain each new file. The folder will be named the same as
the file. Select no to save all files directly to the selected folder.
Click the test button to send a file to the Network Share server. Use Test to confirm that new settings
are correct.
WPS-300-CUB-IP Installation Manual
43
Advertisement
Table of Contents
