Table of Contents
Advertisement
WPS-300-CUB-IP Installation Manual
6. Assembling and Mounting Your Camera
WARNING: This product is NOT weatherproof. Mount indoors only.
The mounting bracket included with the camera is designed for use on any flat surface. Refer to the drawings to determine the best
way to assemble the mount and attach it for your application.
NOTE: Before mounting the camera, write down the MAC address, model number, and physical camera location. These will be
used during setup or if troubleshooting is required.
Base Assembly
Ceiling Mounting
Surface Mounting
Wall Mounting
OR
For initial setup, aim the camera in the general direction of the desired field of view. The position and fine focus will be adjusted
during software setup. After the view is correct, lock down the thumb screw tightly.
View will NOT be level
View will be level
© 2014 Wirepath Surveillance
11
Advertisement
Table of Contents
