Possible Malfunctions - Bartscher M 5110 Manual

7. Possible Malfunctions

Problem
The device does
not turn on.
If the device does not turn on after trying some of the above solutions,
contact customer service.
The ventilator stops
working while the
device is in use
If the problem occurs again, contact customer service.
Internal lighting does
not work.
If the problem occurs again, contact customer service.
Water does not
reach the hose.
If the problem occurs again, contact customer service.
Thermal probe
does not work.
If the problem occurs again, contact customer service.
The situations given above are only examples of potential problems. If these or
other similar problems occur, turn the device off immediately and stop using it.
Contact qualified personnel or the producer to inspect and repair the device.
• Check the power supply
• Check if the device's fuses are damaged.
• Check if the device's door is closed properly.
• Check if the cooking/baking parameters are properly set.
• Check if the device does not display any error messages.
• Turn the device off and wait until the motor overheating safety
device turns itself on again.
• Check if ventilation ducts are blocked.
Use only temperature-resistant light bulbs!
Change the light bulb as follows:
• Check if the multipolar switch is open and the device has
cooled.
• Open the internal glass pane (6.2 „Cleaning").
• Remove the protective glass cover.
• Change the light bulb.
• Check if the water flow stopcock is open.
• Check if the time dial is set to position
Solution
I 6
(unlimited time).
47