Installation And Operation; Safety Instructions - Bartscher M 5110 Manual

Hide thumbs Also See for M 5110:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 29
Additional equipment (not included with device)
Internal temperature probe
Article no. 116.000
1 pair of guide rails suitable for 600 x 400 trays
Article no. 116.002
Base for steam convection ovens on 5, 7, 10 x 1/1 GN
CNS 18/10
Capacity: max 10 x 1/1 GN
Dimensions: W 850 x D 700 x H 741 mm
Article no. 115.068
Manual spray
hose length 2 m
with shut-off valve to the fixed water connection 1/2"
including handle for mounting to the convection-steam furnace, series M + E
Article no. 116.005

5. Installation and operation

5.1 Safety instructions

WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label). Connect the device only in case of compliance!
Take note of the security advice!
See that the cable does not touch any heat sources or sharp edges. Do not let the
cable dangle over the counter edge.
WARNING! Hot surface!
During operation some elements of the device very become hot.
To avoid burns, do not touch hot elements!
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

M 7110M 5230M 10110116.615116.617116.613 ... Show all

Table of Contents