Alarm Limits; Units - TESTO 320 Instruction Manual

6 Using the product
6.1.2.2.
6.1.2.3.
36
info@Testo-Direct.com
All manuals and user guides at all-guides.com
Changing the parameter/unit in a line:
1. Select the line: [▲],
2. Select the parameter: [▲],
3. Select the unit: [▲],
4. Save changes: [OK]
Options:
> [Options] → Number of
measured values per display page.
> [Options] → Blank
selected line.
> [Options] → Delete
> [Options] → Factory
display to the factory settings.

Alarm limits

Alarm limits can be set for several display parameters. An audible
alarm signal is triggered when the alarm limit is reached.
Calling up the function:
> [ ] → Instrument Settings
Switching alarm signals on / off, changing alarm limits:
1. Select function or parameter: [▲],
2. Set parameter: [▲],
3. Save changes: [Finished].
> Reset the enabled value to the factory setting: [Standard].

Units

The units used for parameters in configuration menus can be set.
Call up function:
> [ ] → Device settings
Adjustable units
Parameter Unit
Altitude m,
Pressure mbar,
1. Select the line: [▲], [▼]→ [Edit].
2. Select the unit to be changed: [▲],
3. Confirm the entry: [Finished].
Testo-Direct
www.
[▼] → [Edit]
[▼] [OK]
→
[▼] [OK]
→
lines: change the number of
line: insert a blank line in front of the
line: delete the selected line.
setting: reset the measured value
→ [OK] → Alarm Limits
[▼] → [Edit].
[▼] and partly [◄], [►]
→ [OK] → Units
ft
hPa
[▼] → [OK].
→ [OK]
→ [OK].
→ [OK].
1.888.610.7664
.com