TESTO 320 Instruction Manual page 46

6 Using the product
3.
46
info@Testo-Direct.com
All manuals and user guides at all-guides.com
[Options] Number of
> →
measured values per display page.
[Options] → Recalibrate: the gas sensors are set to zero.
>
> [Options] → Measurement
during a measurement): the measured value display menu is
opened.
Showing the flue gas matrix
This function is only available if the measurement parameter
has been activated in the measured value display.
Call up function:
✓ The flue gas function is open.
> [Options] → Fluegas
Options
> [Options] → Clipboard: data is saved to the clipboard.
> [Options] → Delete
is deleted.
> [Options] → Save: the measured values are saved in a record.
> [Options] → Show numeric
numerical values.
> [Options] → System
during a measurement) Set the system type to be able to
configure the ideal zone (green) of the flue gas matrix, using the
limits pre-configured for each system type.
> [Options] → Reset
deleted.
> [Options] → Thresholds: (This function is not available during
a measurement) Enter limits to be able to configure the ideal
zone (green) of the flue gas matrix.
[Options] CO + O2
> →
should be assigned to the x-axis of the display matrix (O2 or
CO2).
> [Options] → Measurement
during a measurement) Open the measured value display
menu.
Testo-Direct
www.
lines: change the number of
view: (This function is not available
matrix.
clipboard: any data saved to the clipboard
value: data is displayed as
type: (This function is not available
graphic: the displayed graphical values are
CO + CO2: choose which parameter
or
view: (This function is not available
CO
1.888.610.7664
.com