Mpps Tab - Canon CR-1 MARK II Operation Manual

7.5.6 MPPS tab

This screen is displayed when the MPPS tab is clicked.
1 Set the communication parameters.
Item
Server AE Title
Host Name
Port No.
2 Check the connections with the server.
Click [Connection Check...].
If the connections have been made properly, the Information screen is displayed.
When [OK] is clicked, the Information screen is closed.
When the Warning screen is displayed
Check out the following when the Warning screen is displayed.
• Is the network operating properly?
• Is the server working properly?
MPPS tab
Input the title using not more than 16 characters. (Required)
The backslash (\) cannot be input.
Input no more than 32 characters for the IP address or host name. (Required)
Input a number from 0 to 65535 as the port number. (Required)
Information screen
-91-
Operation
7. Settings