Canon CR-1 MARK II Operation Manual page 93

2
Make the setting for the Automatic Accession No. Assignation menu.
To use the Automatic Accession No. Assignation menu, insert a check mark for Enable Automatic
Accession No. Assignation.
When a check mark is inserted, the [Auto Counter Setting...] is enabled, and the automatic
numbering setting is enabled.
The automatic numbering setting can also be made from the Study menu of the main screen.
3 Open the Automatic Numbering Settings screen.
Click the [Auto Counter Setting...].
The Automatic Numbering Settings screen is displayed.
4 Set the automatic numbering items.
After the settings are complete, click [OK].
Item
Assign
Accession No.
automatically
Counter ****
To enable automatic numbering
Check marks must be inserted for the "Enable Automatic Accession No. Assignation" and for
the "Assign Accession No. automatically" in the Automatic Numbering Settings screen to
enable the automatic numbering function.
Automatic numbering function and the Study Input screen
When the automatic numbering function is enabled, the Study Input screen can no longer be
opened, and patient information other than the Accession No. cannot be input.
To input patient information, on the main menu, select Menu > [Study] > [Set Auto
Numbering] to disable the automatic numbering function.
Automatic Numbering Settings screen
Insert a check mark to use the automatic numbering setting.
Enter the counter number of the accession number assigned when the Study
Input screen is opened.
The valid range is from 0 to 999,999,999.
The displayed value **** is the current counter value.
-85-
Operation
7. Settings