List Input - Canon CR-1 MARK II Operation Manual

4. Performing studies

4.2.4 List input

Study information is acquired from the study file (ccrhis.his) and input.
1 Open the Study Input screen.
Click the Study icon, or click [Study] > [Study F1] from the menu bar.
If a tab other than List Input is displayed, click the List Input tab.
The List Input screen that was set in 7.5.4 List Input tab (see page 86) is displayed.
When the Worklist search screen is displayed
If the Worklist search screen (see page 20) is displayed, click [Cancel].
List display
Up to 10,000 items can be displayed in the list.
When the item name of the header is clicked, the sequence in which the studies are displayed can
be changed. However, this does not apply to the No.
2
Display the Setting Search Condition screen.
Click [Search...] to display the Setting Search Condition screen.
List Input screen
Setting Search Condition screen
-16-