Starting A Study Without Opening The Study Input Screen - Canon CR-1 MARK II Operation Manual

4. Performing studies

4.3 Starting a study without opening the Study Input screen

A study can be started as quick as thought skipping input of study information. Enter the patient
information when the study is completed.
1
Display the main screen.
Click [Study] > [Skip Study Input F5] from the menu bar, or press the F5 key on the keyboard.
The main screen is displayed with the Study tab left blank.
2
Display the Study Input screen.
Refer to 4.4 Taking images (see page 23) and 4.5.1 Ending a study (see page 25) to perform
the study. Click [Study Complete] (see page 24), and the Study Input screen opens automatically.
3
Input the patient information.
Refer to 4.2.1 Methods of inputting the study (see page 10) to input the items, and click [OK]
to close the screen.
Note: When the setting for the Automatic Accession No. Assignation (see page 85) has been
made, Skip Study Input is disabled.
Skip Study Input main screen
-22-