Canon CR-1 MARK II Operation Manual page 126

8. Before calling the service technician (Warning)
module id message id
10011
10012
10013
10019
10020
10023
104 Enter User ID/Password.
105 Enter in alphanumeric.
Application will be closed.
109 Press Cancel button and log in to the application to
view the details of the transfer error.
Image can be captured but the storage space for
captured images runs short.
28
Make up space in the drive by deleting studies in
Study Logs List.
Images stored for more than the specified periods
50
will be deleted.
All the studies will be closed and the current user
66
will be logged off.
Application cannot be terminated during transfer. Close all studies after transfer, then exit the
85
All the studies will be closed and then the
86
application will be.
A study with same Accession No. or Patient ID is
10 now in progress.
Do you want to create a new study ?
A study with same Accession No. or Patient ID is
12 now in progress.
Do you want to update ?
No Storage Selected
1000
Image(s) will not be transferred.
Transfer for this study is in progress.
1001 You can't transfer it before the transfer is
completed.
1 Invalid Values for Birth Date
Patient Info. set as any of essential data items are
5
not entered.
The length of either of 5 Patient Name fields is too
6 long.
Shorten the length to 60 characters or less.
12 Invalid character was entered to the field.
Line feed code cannot be entered to Study
14
Description field.
Too Long Patient Name.
15 Shorten the total length of the 5 items to 60
characters or less.
16 Length of Accession No. exceeds the limit.
A character/characters for Accession No. is/are not
17 supported by Acceptable Character Set or Specific
Character Set.
18 Length of Patient ID exceeds the limit.
A character/characters for Patient ID is/are not
19 supported by Acceptable Character Set or Specific
Character Set.
A character/characters for Study Description is/are
21 not supported by Acceptable Character Set or
Specific Character Set.
Character '\' or control character cannot be used for
22
Accession No.
Character '\' or control character cannot be used for
23
Patient ID.
Message
-118-
Detail
When logging in, input the user ID and password.
Input the user ID/password in single-byte
alphanumeric characters.
To check the details of the transfer error, click
[Cancel], and then log in.
Delete studies in the study log screen to increase the
amount of available space in the drive.
To delete the image, click [OK].
To log off, click [OK].
software.
To end the study and exit the software, click [OK].
To start as a new study, click [YES].
To update the study information, click [YES].
Select the storage, and then transfer the image.
Wait until the transfer is completed before
performing the transfer.
Input the correct birth date.
Input the required item that is displayed.
Shorten the length to 60 characters or less.
Re-input the data based on the information displayed
in [Details].
Delete the line feed code.
Input the Patient name in 60 characters or less for all
five items total.
Input within the limited length.
Input using the designated input character type or
specific character set.
Input within the limited length.
Input using the designated input character type or
specific character set.
Delete the backslash (\) and any control characters.