Inputting The Study; Methods Of Inputting The Study - Canon CR-1 MARK II Operation Manual

4. Performing studies

4.2 Inputting the study

4.2.1 Methods of inputting the study

There are four methods below for inputting the study:
1. Manual input (see page 11)
2. Magnetic card/barcode input (see page 13)
3. List input (see page 16)
4. Worklist input (see page 19).
Up to three sets of study can be input, after which it is no longer possible to click the Study icon.
When a multiple number of sets of study have been input, click the study tab to select a study.
Study tab
The following information is displayed on the study tab.
Patient Name
Patient ID
Accession No.
Item
This item is indicated as the Patient Name.
This item is indicated as the ID: Patient ID.
This item is indicated as the No. Accession No. However, if both the
Patient ID and Accession No. have been input, only the Patient ID will be
displayed.
Description
-10-