Canon CR-1 MARK II Operation Manual page 128

8. Before calling the service technician (Warning)
module id message id
10024
10026
10027
10028
Character '\' or line feed code cannot be used for
4
Study Description.
A character/characters for Study Description is/are
11004
not supported by Specific Character Set.
11005 One or more studies are in progress.
12001 Number of selected images is not two.
Enter essential data.
102
[item]
Enter in alphanumeric except '\'.
103
[item]
Character '\' cannot be used.
104
[item]
A character/characters is/are not supported by the
105
specified character set.
1001 No default is registered.
Length for a storage path exceeds the maximum.
1101
[Max. ***]
Enter essential data.
1102
[item]
Enter in alphanumeric.
1103
[item]
Enter in numeric.
1104
[item]
1105 Duplicated Storage Name
Entered value exceeds the limit.
1106
[item (*** - ***)]
1107 Entered value could not be checked.
Association with Storage Server was rejected.
1110
Check the settings and status of Storage Server.
1111 Enter in alphanumeric except '\'.
1401 Storage will be deleted from the list.
Number of selected storages exceeds the
2001
maximum.
104 User will be deleted.
202 No Essential Data
203 Enter in alphanumeric.
Character '\', '=' or control code cannot be used.
204
[item]
Wrong Confirmation Password.
205
Enter the password again.
A character/characters is/are not supported by the
207
specified character set.
Character '\', '=' or control code cannot be used.
302
[item]
A character/characters is/are not supported by the
305
specified character set.
No Essential Data
402
[item]
Enter in alphanumeric.
403
[item]
Message
-120-
Detail
Delete the backslash (\) or line feed code.
Input using the specific character set.
End the study.
Select two images.
Input the required items.
Delete the backslash (\).
Input using the specific character set.
When a storage has been registered, check "Set as
Default Storage" for one of the storages.
Select a folder where the number of characters for
the Image Storage Directory (Folder) (see
page 80) is fewer than 150 characters.
Input the required items.
Use alphanumerics for the input.
Use numerics for the input.
Change the Storage Name.
Set to a value which does not exceed the input limit.
Use alphanumerics for the input.
• Check that the storage server is operating
properly.
• Check the settings on the Create a New Storage
screen (see page 92).
Delete the backslash (\).
To delete the storage, click [OK].
Up to two storages can be checked for "Set as
Default Storage."
To delete the user, click [OK].
Input the required items.
Use single-byte alphanumerics for the input.
Delete the backslash (\), equal sign (=) or control
code.
Input the same characters as for Password into
Password(confirm).
Input using the specific character set.
Delete the backslash (\), equal sign (=) or control
code.
Input using the specific character set.
Input the required items.
Use alphanumerics for the input.