Study Logs Tab - Canon CR-1 MARK II Operation Manual

3
Select the Enabled Items.
To add or delete a display item, select the item, and then click
4 Set the order in which the items are to be saved.
The items displayed as the Enabled Items will be saved in sequence from the top. To change the
sequence in which the items are saved, select the item, and then click [Up] or [Down].
5
Save the settings and exit the screen.
Click [OK].

7.7.2 Study Logs tab

Select the settings for updating the UIDs if images are to be re-transferred when study logs or past studies
are displayed.
However, these settings do not apply to studies whose transfer status (see page 31) is "untransferred."
Update "Study Instance
UID" on re-transfer
Update "Series
Instance UID" on re-
transfer
Update "SOP Instance
UID" on re-transfer
Whichever item is selected, only the transfer time is updated.
Furthermore, it is the information of the images to be re-transferred that is updated and not the information
of the images saved.
Item
If this is checked, the study instance UID is issued as follows.
Model UID. study ID. transfer time (YYYYMMDDHHMMSS)
If this is checked, the series instance UID is issued as follows.
Model UID. study ID. transfer time (YYYYMMDDHHMMSS).
series number
If this is checked, the SOP instance UID is issued as follows.
Model UID. study ID. transfer time (YYYYMMDDHHMMSS).
series number. instance number (image number)
Study Logs tab
Operation
-99-
7. Settings
or .