Canon CR-1 MARK II Operation Manual page 129

module id message id
Wrong Confirmation Password.
404
Enter again.
No Essential Data
502
[item]
Enter in alphanumeric.
503
[item]
10028
Wrong Old Password.
504
Enter the password again.
Wrong Confirmation Password.
505
Enter the password again.
New password is the same as the old password.
508
Enter again.
Invalid Module File Combination.
10031 11 To use the MPPS module, enable the worklist
module.
10033 201 Print Adjustment parameters will be updated.
Association with MPPS Server was rejected.
9
Check the settings and status of MPPS Server.
Invalid Server AE Title
10 Check that valid characters are entered for AE
Title.
10044
Invalid Server Host Name
11 Check that valid characters are entered for Host
Name.
Invalid Port Number
12 Check that a numeric within the range between 0
and 65535 is entered.
Association with Worklist Server was rejected.
7
Check the settings and status of Worklist Server.
Specified value for Time is out of range.
8
Enter a value between 1 and 24.
Specified Range of Date are out of range.
9
XXXXX - XXXXX
Specified Range of Days are out of range.
10
Enter values between 0 and 999.
Invalid Worklist Search Interval.
11 Check that a numeric within the range between 0
and 60 is entered.
Invalid Server AE Title
12 Check that valid characters are entered for AE
Title.
10045
Invalid Server Host Name
13 Check that valid characters are entered for Host
Name.
Invalid Port Number
14 Check that a numeric within the range between 0
and 65535 is entered.
Invalid Search Condition Value(s)
Selected item has an invalid character or the length
16 is too long.
[XXXX] (DICOM TAG Name+DICOM TAG
Number)
The same DICOM tag is already set up for Search
Conditions.
18
[XXXX] (DICOM TAG Number+DICOM TAG
Name)
8. Before calling the service technician (Warning)
Message
-121-
Detail
Input the same characters as for Password into
Password(confirm).
Input the required items.
Use alphanumerics for the input.
Input the registered password.
Input the same characters for New Password and
New Password(confirm).
Do not input the Current Password as the New
Password.
When the MPPS tab (see page 91) has been set, set
the Worklist tab (see page 88) as well.
To update the parameters, click [OK].
• Check that the MPPS server is operating
properly.
• Check the MPPS tab (see page 91) settings.
Check the MPPS tab (see page 91) settings.
• Check that the worklist server is operating
properly.
Check the Worklist tab (see page 88) settings.
•
Refer to 7.5.5.3 Setting the search conditions
(see page 89).
Refer to 7.5.5.2 Performing the Worklist Server
Settings (see page 88).
Refer to 7.5.5.3 Setting the search conditions
(see page 89).
It is not possible to register a multiple number of the
same DICOM tag.
Continued on the following page >>