Using Simple Printing To Print Images - Canon CR-1 MARK II Operation Manual

4
Save the settings.
Click [OK].

6.7.2 Using simple printing to print images

The simple printing function of the control software is used to print images with the printing parameters
that were adjusted in 6.7.1 Adjusting the printing parameters (see page 60).
1
Turn on the power of the printer.
2
Select the image.
Click the thumbnail image.
To select multiple images, click the images while holding down the Ctrl key on the keyboard. To
select a range of images, click the images while holding down the Shift key on the keyboard.
3 Open the Page Setup screen.
On the menu bar, click [File] > [Page Setup...] in this order.
4
Set the paper size, printing orientation, margin, printer, and other parameters.
Setting values
When starting this software, the setting values for the default printer are used.
If the paper, printing orientation, and printer settings are changed, the only setting value saved after
restarting is the margin setting.
Page Setup screen example
-61-
6. Main screen operations
Continued on the following page >>