Canon CR-1 MARK II Operation Manual page 127

module id message id
Character '\,' line feed, or control character cannot
24
be used for Study Description.
Character '\', '=', '^' or control code cannot be used
29
for Last Name.
Multi-byte character cannot be used for Last
30
Name.
Character '\', '=', '^' or control code cannot be used
31
for First Name.
Multi-byte character cannot be used for First
32
Name.
Character '\', '=', '^' or control code cannot be used
33
for Middle Name.
Multi-byte character cannot be used for Middle
34
Name.
Character '\', '=', '^' or control code cannot be used
35
for Prefix.
36 Multi-byte character cannot be used for Prefix.
Character '\', '=', '^' or control code cannot be used
37
for Suffix.
38 Multi-byte character cannot be used for Suffix.
Out-of-Range Birth Date (A date earlier than 1869
39
or later than tomorrow is entered.)
40 Entered date is invalid for Birth Date.
A character/characters for Patient ID is/are not
41
supported by Specific Character Set.
A character/characters for Accession No. is/are not
10023
42
supported by Specific Character Set.
A character/characters for Last Name is/are not
43
supported by Specific Character Set.
A character/characters for First Name is/are not
44
supported by Specific Character Set.
A character/characters for Middle Name is/are not
45
supported by Specific Character Set.
A character/characters for Prefix is/are not
46
supported by Specific Character Set.
A character/characters for Suffix is/are not
47
supported by Specific Character Set.
A character/characters for Study Description is/are
48
not supported by Specific Character Set.
A character/characters for Last Name is/are not
55
supported by Acceptable Character Set.
A character/characters for First Name is/are not
56
supported by Acceptable Character Set.
A character/characters for Middle Name is/are not
57
supported by Acceptable Character Set.
A character/characters for Prefix is/are not
58
supported by Acceptable Character Set.
A character/characters for Suffix is/are not
59
supported by Acceptable Character Set.
60 All the items are disabled to input.
There is no header string set up in Input Format.
61
Do you want to start study?
8. Before calling the service technician (Warning)
Message
-119-
Detail
Delete the backslash (\), line feed code, and any
control characters.
Delete the multi byte characters.
Delete the backslash (\), line feed code, and any
control characters.
Delete the multi byte characters.
Delete the backslash (\), line feed code, and any
control characters.
Delete the multi byte characters.
Delete the backslash (\), line feed code, and any
control characters.
Delete the multi byte characters.
Delete the backslash (\), line feed code, and any
control characters.
Delete the multi byte characters.
Input the correct birth date.
Input using the specific character set.
Check the input-prohibited items.
Check the header character string that was set in
Input Format (see page 84).
Continued on the following page >>