Canon CR-1 MARK II Operation Manual page 122

8. Before calling the service technician (Error)
module id message id
10024
10031
10040
10045
10048
10049
10052
10053
10056
10063
311 No main image is selected.
10308 No image is selected.
No Manual or Mag/Barcode Input module is set.
3
At least one is required.
104 No Storage Directory
105 Failed to create a folder.
106 The same file name exists in the storage directory.
Error occurred when the file was moved to the
107
storage directory.
Failed to search worklist.
5 It may be caused by communication failure with
the worklist server.
Failed to initialize the magnetic card/bar code
25
device.
Failed to initialize the magnetic card/bar code
41
device.
11 Failed to register Patient Info. in the database.
Failed to initialize the magnetic card/bar code
49
device.
The studies were not read. Number of studies
50
exceeded the maximum to read.
100 No printer is installed.
200 No main image is selected.
Image Read Error
201 Only print info. is output since image reading has
failed.
Print Error
300
Printing is cancelled.
Print Error
301
Printing is cancelled.
Failed to communicate with the magnetic card/bar
code reader.
8
Check the cable.
Check the settings.
204 No Storage Directory
205 The same file name exists in the storage directory.
206 Failed to save JPEG File.
207 Failed to create a folder.
JPEG File Saving Error
1
[Error description]
Message
-114-
Detail
Select an image.
Select the target image.
Select the Manual Input Module tab (see page 83)
or the Mag Barcode Input Module tab (see
page 86).
Check the name of the storage folder.
Check the access permissions for the storage folder.
Either change the name of the storage file, or delete
the file with the same name.
Check the access permissions for the storage file.
Check that the worklist server is operating properly.
Check the magnetic card/barcode reader connection.
The magnetic card/barcode reader settings need to
be made.
Please contact a Canon representative or
distoributor.
The study progress status could not be saved to the
study file. Check if the study file (ccrhis.his) is set to
read-only.
Check the magnetic card/barcode reader connection.
The magnetic card/barcode reader settings need to
be made.
Please contact a Canon representative or
distoributor.
Please reduce the number of studies in the study file
(ccrhis.his) to the number of displayable studies.
Install the printer from the Printers and Faxes screen
in the Control Panel.
Select the printing image.
The printing information and the text "NO IMAGE"
are printed for images where a reading error has
occurred.
Check the printer server and network cable
connections.
Check the magnetic card/barcode reader connection.
The magnetic card/barcode reader settings need to
be made.
Please contact a Canon representative or
distoributor.
Refer to 7.6 Storage (see page 92), click [Edit] in
the storage setting screen, and check the storage
directory.
Either delete the file with the same file name at the
storage directory, or change the storage.
Refer to (2) in 2.1 Software (see page 3), and set
the proper access privileges for the storage folder.
Refer to (2) in 2.1 Software (see page 3), and set
the proper access privileges for the storage folder.
Refer to the error description, and check the file into
which the data is to be saved.