Ending A Study And Transferring Images; Ending A Study - Canon CR-1 MARK II Operation Manual

4.5 Ending a study and transferring images

4.5.1 Ending a study

1
End the study.
Click [Study Complete]. The Study Complete screen is displayed.
To end the study, click [OK].
To select the storage, follow the steps described below.
When [Study Cancel] is selected
When [Study Cancel] is clicked, the Study Cancel screen is displayed.
If [OK] is then clicked, the study is ended without saving the images which have been taken.
Study Complete and Study Cancel
The same operation can be performed by selecting [Study] > [Study Complete F12] or [Study]
> [Study Cancel] from the menu bar.
When a study is started without opening the Study Input screen
When a study is started without opening the Study Input screen, click [Study Complete] to
display the Study Input screen. Refer to 4.2 Inputting the study (see page 10), and input the
study information.
Study Complete screen
Study Cancel screen
-25-
4. Performing studies
Continued on the following page >>