Table of Contents
Advertisement
Camera Tab
Preset Settings
1
2
100
For the VB150 (or the VB101), tabs will be
created for all cameras for which "Use this
Camera" is selected in the settings page. For
the VB-C10/VB-C10R, tab will be created for
Camera 1.
• Camera name can be edited. The camera
name entered in the camera server's
settings page will be set by default.
• You can confirm the type of camera,
whether controlled or not, video capture
size, video quality, and whether a
wide-angle converter is used or not.
• Preset settings can be made with the
Setup Presets button.
• Auto Preset Tour settings can be made
with the Setup Auto Preset Tour button.
Preset angles can be set in the Presets Settings
dialog box by the following three methods:
(1) Click Display Viewer and specify angles by
operating the viewer that is displayed. Use the
Add button to capture that position as a preset.
(2) Click the New button and a yellow frame will
appear in the Preview window. Move pan and tilt
positions by dragging the yellow frame and
change the zoom value by dragging the edge of
the frame.
(3) Click the New button and change the values in
the "Pan", "Tilt" and "Zoom" boxes.
Registered presets will appear in the Presets. Select
by clicking a preset name and you can then alter the
angles by the three methods shown above. If you
wish to compensate for backlighting, select the
"Backlight Compensation" box.
Advertisement
Table of Contents
