Canon CR-1 MARK II Operation Manual page 98

7. Settings
3
Set the Search Conditions : DICOM Tag Keyword.
Set the search tag in the list box on the left.
Input the value in the text box on the right. An asterisk (*) can be used as a wild card.
DICOM Tag Keyword
AE Title (00400001)
Scheduled Station
Name (00400010)
Modality (00080060)
Patient ID (00100020) Input no more than 64 characters.
Scheduled
Performing
Physician's Name
(00400006)
Scheduled Procedure
Step Location
(00400011)
Patient Name
(00100010)
Accession No.
(00080050)
Requested Procedure
ID (00401001)
4
Save the settings for the search conditions.
Clicking [OK] saves the settings and closes the Search Conditions screen.
5
Set the Worklist Search Interval.
Worklist Search
Interval
Display Worklist
Search window
Search Conditions :
Item
When searching for a worklist while the Study Input screen is displayed,
input a number from 0 to 60 as the interval after which the worklist is to be
automatically searched again. (Required)
If 0 has been input, the worklist will not be searched again.
Check this if the Worklist Search screen is to be displayed automatically
when the Study Input screen is displayed or when the Worklist tab has been
selected.
Input no more than 16 bytes.
Input no more than 16 characters.
Input no more than 16 bytes.
If the classification of the Component Group is to be used for the input, use
the equal sign (=) as the delimiter.
First=Second=Third
First: Input no more than 64 characters, Second and Third: No more than
63 characters
Input no more than 16 characters.
If the classification of the Component Group is to be used for the input, use
the equal sign (=) as the delimiter.
First=Second=Third
First: Input no more than 64 characters, Second and Third: No more than
63 characters
Input no more than 16 characters.
Input no more than 16 characters.
-90-
Operation
Operation