Canon CR-1 MARK II Operation Manual page 22

4. Performing studies
2
Input the study from the magnetic card/barcode reader.
Use the magnetic card/barcode reader to input the study.
A search for the input items is performed on the previously studied patient list, and the search results
are input.
If the input items were already manually input, they are overwritten by the data from the magnetic
card/barcode reader.
3
Input the required study items manually.
Patient ID
Accession No.
Patient Name
Birth Date
Sex
Study Description
Mag Barcode Input screen (after search)
Item name No. of characters
Not more than 64 characters The backslash (\) cannot be input.
Not more than 16 characters
Not more than 64 characters
Not more than 64 characters
Characters other than the preset specific
character set (see page 76) cannot be
input.
The backslash (\) and equal sign (=)
cannot be input.
Characters other than the preset specific
character set (see page 76) cannot be
input.
If the patient name has been set as an
Essential Data, an error will result unless
at least one form of the name is input.
Input the items separated by a space,
comma, or circumflex (^) in the order of
Last Name, First Name, Middle Name,
Prefix, and Suffix.
How this is input depends on the birth
date input setting (see page 83).
Select either Male, Female or Other.
The backslash (\) cannot be input.
Characters other than the preset specific
character set (see page 76) cannot be
input.
Information input in Study Description is
displayed in the Study Description section
in the main screen.
-14-
Description