Transfer Timing Tab - Canon CR-1 MARK II Operation Manual

Item
Station Name
Location
Institutional
Department Name
Institution Name

7.2.2 Transfer Timing tab

Select the timing at which the images are to be transferred.
When a study is
completed
Manual
Input no more than 16 characters.
The backslash (\) cannot be input.
Input no more than 64 characters. (Required)
The backslash (\) cannot be input.
Transfer Timing tab
Item
When a study is completed, images are automatically output to the
storages which has been set in 7.6 Storage (see page 92).
When a study is completed, images are not automatically output.
When outputting the images, refer to 5.1.3 Transferring studies (see
page 33).
Operation
Operation
-75-
7. Settings