Searching For Studies - Canon CR-1 MARK II Operation Manual

5. Operations on study logs

5.1.2 Searching for studies

1
Display the Search screen.
Click [Search...] on the Study Logs screen (Temporarily Saved tab).
2
Set the search conditions.
Study Date
Item
Keyword
[Default]
3
Proceed with the search.
Click [OK].
The search starts, and its results are displayed on the Study Logs screen.
Number of displayed study logs in list
The maximum number of study logs that can be displayed in the list is 10,000. A flashing error icon
search conditions. The error icon
displayable range.
Display
Input the search start date on the left and the search end date on the right.
It is also possible to set only the start date or end date.
Click
Input a keyword consisting of up to 64 characters.
No distinction is made between upper-case and lower-case characters.
A search based on a keyword will not be conducted if no characters have
been input.
When this is clicked, the 7.11 Study Logs (see page 110) setting is
applied to the Study Date.
is displayed when the number of displayable study logs is exceeded, and so please change the
Search screen
Operation
to select the search item.
disappears once the number of study logs is within the
-32-