Exiting The Study Log Screen; Transferring The Study And Exiting The Study Log Screen - Canon CR-1 MARK II Operation Manual

5. Operations on study logs

5.3.4 Exiting the study log screen

5.3.4.1 Transferring the study and exiting the study log screen

Click [Transfer].
The Transfer the study(ies) screen is displayed. Click [OK].
However, if the transfer status is "Transfer," a Warning screen is displayed, and the study concerned cannot
be transferred.
When the studies are transferred, the DICOM information will be changed in accordance with the settings
of the 7.7.2 Study Logs tab (see page 99) except for those studies which are in the untransferred
transfer status.
Concerning the selection of the storages
When selecting the storages, refer to 4.5.1 Ending a study (see page 25).
5.3.4.2 Exiting the study log screen
Click [Close].
The Close a study log screen is opened. Click [OK].
[Transfer] and [Close] for past studies
The same operations can be performed by selecting [Study] > [Close] and [Study] > [Transfer]
from the menu bar.
Transfer the study(ies) screen
Close a study log screen
-40-