Starting Up And Exiting The Software; Starting Up The Software And Logging In - Canon CR-1 MARK II Operation Manual

3. Starting up and exiting the software

3.1 Starting up the software and logging in

Note: Before proceeding, log in as a user who has an appropriate access rights in Windows.
For details, refer to (2) in 2.1 Software (see page 3).
Check that the power of the retinal camera is on, and either double-click the Canon CR-1 Mark II icon on
the desktop or from the taskbar click [Start] > [All Programs] > [Canon Retinal imaging control
software NM] > [Canon CR-1 Mark II] in this order. The login screen will appear.
Objective
Performing
studies
Setting the
software
Exiting the
software
Login screen
Operation
Input the User ID and Password, and click [Login].
The main screen is displayed.
User ID distinguishes neither upper-case letters nor lower-
case letters.
Input the User ID and Password with which the Privilege
(see page 100) has been set to the Administrator, and
click [Settings].
The setting screen is displayed.
User ID distinguishes neither upper-case letters nor lower-
case letters.
Click [Exit].
However, it cannot be clicked while images are being
transferred.
-7-
Reference chapter
and page
4. Performing
studies (see page 9)
7. Settings (see
page 73)
3.2 Exiting the
software (see
page 8)