Table of Contents
Advertisement
Starting and Closing SMS
You must log in to SMS (Service Management Service) to install PullPrint Service Provider.
SMS is software that can access the printer via the network from your Web browser, enabling you to
install and manage PullPrint Service Provider.
NOTE
•
The default password is 'MeapSmsLogin' (case sensitive).
•
This password helps prevent unauthorized printer operations.
•
In order to prevent erroneous usage, the administrator should change the password when
usage begins. For information on changing the password, see the manual accompanying your
device.
•
Make sure that you do not forget your password. Otherwise, you will not be able to access SMS.
•
If you forget your password, contact your local authorized Canon dealer.
•
The appearance of the SMS screen differs depending on the model of the machine. For more
information on SMS, see the manual accompanying your device.
Starting and Logging In to SMS
Log in to SMS to install PullPrint Service Provider. The login procedure is as follows.
IMPORTANT
•
Before starting SMS, set the IP address of the printer.
•
Multiple users cannot log in to SMS at the same time.
•
The default login method is set to using the shared password for SMS. To log in using the user
name and password for the SDL, SSO, or SSO-H login service, the login method must be started.
For more information on starting a login method, see the manual accompanying your device.
Starting and Closing SMS
2-3
Advertisement
Table of Contents
