Reading Therapy Time - Weinmann homecare SOMNOsoft + WM 24600 Description And Operating Instructions

5.7 Reading therapy time

The SOMNOsoft + stores the data for 366 days and the associated therapy duration. You
can display the following figures:
• Total therapy time in hours,
• Average therapy duration per day
• Therapy duration for current day, showing date
Note:
A therapy day begins and ends at 12 noon. Data recorded from 12 midnight to 12 noon
are allocated to the previous calendar day.
The total therapy time is displayed for a few seconds when the device is switched on. To
read the other data, proceed as follows:
1. When switching off the device, keep the On/Off button
apy time (lower line) and the average daily therapy time (upper line) appear in the dis-
play.
2. Release the button. After a few seconds the display shows the date and the stored
therapy duration for the current day.
The date and the daily therapy duration appear briefly
in the display
21
display.
3. Detach the hose connection and the exhalation system
from the mask.
4. Clean the mask and the exhalation system (see "6.
Hygienic preparation" on page 19).
Important!
When in standby mode, SOMNOsoft + uses approx.
3.5 watt. To save electricity, you can remove the power
plug from the mains socket when the device is not in use.
3
The stored data and settings are preserved.
. After that, only "0" appears in the
pressed until the total ther-
24
Operation 17