Table of Contents
Advertisement
Chapter 6. Recording Operation
You can also perform Automatic and Manual recordings during Periodic recording. For this
purpose:
1. Select the recording mode.
2. Press the Start/Stop key.
After that recording in the selected mode is finished, Periodic recording will be started
automatically.
6- 3 Copy Mode
When the recording is finished, press Copy key to record the last stored data once more.
Only in Automatic and Periodic modes, stored data can be copied.
When the system is turned off and on, data cannot be copied.
6- 4 Recorder Paper
Use only heat sensitive recording paper with 63 mm width.
Use only the manufacturer recommended record paper,
otherwise the recording quality may be poor and the thermo
sensitive print head may be damaged.
Do not touch the recorder head while recording and immediately
after recording because it is so hot and may lead to personal injury
including burns.
.
.
37
Advertisement
Table of Contents
