Table of Contents
Advertisement
Chapter 6. Recording Operation
6- 2 Recording Type
6-2-1- Manual Recording
Press Mode key on the screen or the control panel to toggle between Manual 1, Manual 1+1,
Manual 2, Manual 2+1and Manual3.
Press the Start/Stop key on the control panel to start recording. The recording will continue until
you press this key again.
Press Lead► and ◄Lead keys to switch lead (lead group) during the recording.
Note that you can only record the selected leads.
■Manual 1 :Select this mode and press ◄Lead and Lead► keys to choose between lead groups.
Then press the Start/Stop key to start recording.
■Manual 1+1:Select this mode and press ◄Lead and Lead► keys to choose between lead
groups. Then press the Start/Stop key to start recording.
Augmented (+1) in these modes refer to Rhythm Lead. Select this
lead in menu setting.
.
In the recording paper, the above waveform indicates the waveform of selected lead and the
below one is the waveform of selected Rhythm lead.
.
■Manual 2 :Select this mode and press ◄Lead and Lead► keys to choose between lead groups.
Then press the Start/Stop key to start recording.
■Manual 2+1 : Select this mode and press ◄Lead and Lead► keys to choose between lead
groups. Then press the Start/Stop key to start recording.
In the recording paper, the above waveform indicates the waveform of selected lead and the
below one is the waveform of selected Rhythm lead.
■ Manual 3 : Select this mode and press ◄Lead and Lead► keys to choose between lead
groups. Then press the Start/Stop key to start recording.
In manual modes, press ◄Lead and Lead► keys to choose between lead groups and press
Start/Stop key to stop recording.
6-2-2- Automatic Recording
Press Mode key on the screen or the control panel to toggle between Auto1,Auto 1+1, Auto2,
Auto2+1 and Auto3.
35
Advertisement
Table of Contents
