Copy Mode - Saadat Dena 640 User Manual

Electrocardiograph
Table of Contents

Advertisement

Rhythm Recording
Select Rhythm using the Mode key on the screen or control panel to see ECG waveform of the
rhythm lead in four traces. Press Start/Stop key to record according to "Length of Rhythm Rec"
(Refer to section 2 "User Setting Menu").
A counter starts from Length of Rhythm Rec and countdown to zero. After that record starts.
There are always six channels of recording in this mode.
Periodic Recording
To perform periodic recording:
1. Set On "Periodic Recording" and select your desired time interval (5-60 min).
2. Select number of recording repetitions. Available options are "infinite" and 1-20.
3. Select recording mode using Mode key.
(For more information about Periodic recording settings, refer to "User Setting Menu" in section 2)
You can also perform Automatic and Manual recordings during Periodic recording. For this purpose:
1. Select the recording mode.
2. Press the Start/Stop key.
After that recording in the selected mode is finished, Periodic recording will be started automatically.
NOTE : Periodic recording always perform in Auto modes.

Copy Mode

When the recording is finished, press Copy key to record the last stored data once more.
Only in Automatic and Periodic modes, stored data can be copied.
When the system is turned off and on, data cannot be copied.
46

Advertisement

Table of Contents
loading

Table of Contents