Print Mode Menu - Saadat DENA 650 User Manual

Electrocardiograph
Hide thumbs Also See for DENA 650:
Table of Contents

Advertisement

Chapter 2: System settings

Print Mode Menu

Select Print Mode from the Main Menu to access the below menu:
The following items can be set through this menu:
available options are Auto, Manual and Rhythm.
Print Mode:
Auto: Automatic modes of recording are 1+1, 3, 3+1 and 6.
Manual: Manual modes of recording are 1+1, 3, 3+1 and 6.
Rhythm: Available options for duration of Rhythm recording are 30, 60, 90, 120, 150 and 180.
available options for this item are Real time and Sync.
Rec state:
In the Sync mode, the signals of different leads are recorded simultaneously i.e. recording of all
leads starts at the same time.
In the Real time mode, at the moment of recording each signal, the signal received from the
patient is used at the same time.
if you select Auto 1+1, Auto 3+1, Manual 1+1, Manual 3+1 or Rhythm mode,
Rhythm Lead
Rhythm Lead will be enabled and selectable.
The Rhythm lead can be one of I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5 and V6
leads
Select ON to print the signal and recording information on header of the recorder
Header:
paper. Select OFF to print only signal on the paper (without any information).
NOTE
For more information about Recording types, see the chapter Recording Operation.
Sync recording can be performed only in Automatic modes.
Figure 2-2 Print mode menu
17

Advertisement

Table of Contents
loading

Table of Contents