Table of Contents
Advertisement
10-2 Cleaning and Disinfection
General Points
Use only the substances approved by us and methods listed in this chapter to clean or disinfect your
equipment.
Manufacturer makes no claims regarding the efficacy of the listed chemicals or methods as a means
for controlling infection. For the method to control infection, consult your hospital's Infection Control
Officer or Epidemiologist. See also any local policies that apply within your hospital.
1) Before cleaning the electrocardiograph or the accessories, make sure that the equipment
is switched off and disconnected from the power line.
2) Sterilization may cause damage to ECG device and is therefore not recommended for this
device otherwise indicated in the instructions delivered with accessories or your hospital's
maintenance schedule.
3) If you see any signs of damage or deterioration in the device and its accessories, do not
use it, and if necessary, contact the after-sales service company.
4) Allow the Electrocardiograph system to dry completely before making connections. And
please make sure all connectors tightly connected to the system before using the system.
1- The electrocardiograph system and its belongings must be kept dust-free.
2- Do not use strong solvents such as acetone or ammonia.
3- Most cleaning agents must be diluted before use.
4- Don't use rough or sharp material or your fingernail to remove stubborn stains.
5- Do not let the cleaning agent enters into the chassis of the system.
6- Do not leave the cleaning agents on any part of the equipment.
Do not use ETO gas to disinfect the electrocardiograph.
47
Advertisement
Table of Contents
