Table of Contents
Advertisement
Chapter 2. System Configuration
Control Panel
Dena350 is designed in such a way that user can easily perform operations by using keys and
touch screen.
1-On/Off:
Press to turn on or off the device.
2-Sens:
Use to adjust the amplitude of ECG waveform on the screen and recording paper.
3- Copy:
Press to print the last recorded data.
4-Speed:
Use to adjust the recording speed.
5-Calib:
Press to record a 1mv calibration signal.
6-◄Lead:
Press to select previous lead (s).
7-Lead►:
Press to select next lead (s).
8-Start/Stop:
Press to start/stop ECG recording.
9- Reset:
Use to reset Drift filter and restoring signals quickly to the screen.
10-Mode:
Use to select recording mode.
11
Arrow Keys:
-
Use to scroll between menus.
12- Enter:
Press to enter software menus or select menus options.
13- Menu:
Press to access Main Menu.
Figure 2-3 Control Panel
10
Advertisement
Table of Contents
