Table of Contents
Advertisement
Chapter 2. System Configuration
Display Screen
Dena350 is equipped with a TFT color screen. All 12-lead ECG waveform, HR value, Patient ID,
Date and Time, system and battery operating status, error and informative messages are displayed
on the screen. The screen is divided into three areas: Header area (Figure 2-2) Waveform / Menu
area (Figure 2-2), Messages area (Figure 2-2).
Header Area:
The Header Area is at the top of the screen. The parameters displayed in Header Area are heart
rate, current date and time and system operating status.This information is displayed on the
screen throughout the system operation.
The HR value is measured and updated per second.
Waveform/ Menu Area:
Rhythm-lead or 12-lead ECG waveforms are displayed on the screen and their arrangement
could not be changed.
ECG lead type is displayed in Waveform Area.
Message Area:
The message area is divided into two parts:
1- Lead error message area:
Figure 2-2 Display Screen
8
Advertisement
Table of Contents
