Table of Contents
Advertisement
Chapter 6. Recording Operation
If the paper is jammed, open the recorder door and remove the
paper. Do not pull the paper out by force.
Be careful when loading the paper in the recorder. Avoid
damaging the thermal head. Do not touch thermal head.
It is recommended to use the paper with colored marks intended
to aware user that the paper is near to finish. Otherwise user should
ensure that sufficient paper has been fed to the recorder before
recording.
6-4-2- The following information are printed on the recorder paper
■ Recording mode
■ Date and time
■ Patient information
■ Recording speed
■ ECG lead, gain and filter
■ System model, Software and Hardware version
■ Patient blood type
■ Heart Rate value
6-5- Recorder Cleaning
Accumulation of paper powder or foreign object between the thermal head and platen roller
reduces the print quality. Clean the head elements and platen roller surface using a cloth
moistened with alcohol. Wait until the alcohol dries, then close the recorder door.
Do not clean the recorder immediately after recording because
thermal head and its surrounding area are hot during and after
recording.
Do not use sandpaper or other sharp objects for cleaning the
recorder.
40
.
.
.
Advertisement
Table of Contents
