Saadat Dena 350 User Manual page 42

Electrocardiograph
Hide thumbs Also See for Dena 350:
Table of Contents

Advertisement

Chapter 6. Recording Operation
Press Start/Stop key on the control panel to start recording for 3-12 seconds(Refer to section 2
"User Setting Menu").
■ Auto 1: Select this mode and press the Start/Stop key to start recording.
■ Auto 1+1 :Select this mode and press the Start/Stop key to start recording.
In the recording paper the above waveform indicates the waveform of selected lead and the
below one is the waveform of Rhythm lead.
■ Auto 2: Select this mode and press the Start/Stop key to start recording.
■ Auto 2+1: Select this mode and press the Start/Stop key to start recording.
In the recording paper the above waveform indicates the waveform of selected lead and the
below one is the waveform of Rhythm lead.
■ Auto 3: Select this mode and press the Start/Stop key to start recording.
6-2-3- Rhythm Recording
Select Rhythm using the Mode key on the screen or control panel to see ECG waveform of the
main lead in four traces. Press Start/Stop key to record according to "Length of Rhythm Rec"
(Refer to section 2 "User Setting Menu").
There are always three channels of recording in this mode.
6-2-4- Periodic Recording
To perform periodic recording:
1. Set On "Periodic Recording" (Menu>>User Setting>> Next page>>Periodic Recording) and
select your desired time interval (5-60 min).
2. Select number of recording repetition(Menu>>User Setting>> Next page>>Periodic Interval
Repetition). Available options are "infinite" and 1-20.
3. Select recording mode using Mode key.
(For more information about Periodic recording settings, refer to "User Setting Menu" in section
2)
36

Advertisement

Table of Contents
loading

Table of Contents