Print Mode Menu - Saadat Dena User Manual

Electrocardiograph
Hide thumbs Also See for Dena:
Table of Contents

Advertisement

Chapter 2: General settings

Print Mode Menu

Select Print Mode from the Main Menu to access the below menu:
The following items can be set through this menu:
 Print Mode: Available options are Auto, Manual and Rhythm.
Auto: Automatic modes of recording are 1+1, 3, 3+1 and 6.
Manual: Manual modes of recording are 1+1, 3, 3+1 and 6.
Rhythm: Available options for duration of Rhythm recording are 30, 60, 90, 120, 150
and 180.
For more information about different types of recording, please refer to section 5 (Recording
Operation).
 Rec State: Available options for this item are Real time and Sync.
In the Sync mode, the signals of different leads are recorded simultaneously i.e. recording
of all leads starts at the same time.
In the Real time mode, at the moment of recording each signal, the signal received from
the patient is used at the same time.
Sync recording can be performed only in Automatic and Periodic modes.
 Rhythm lead: if you select Auto 1+1, Auto 3+1, Manual 1+1, Manual 3+1 or Rhythm
mode, Rhythm Lead will be enabled.
The Rhythm lead can be one of I, II, III, aVL, aVR, aVF, V1, V2, V3, V4, V5 and V6 leads.
Figure 2-2 Print mode menu
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dena 650

Table of Contents