Reset Command - ATEN KE6900ST User Manual

Reset Command

The Reset command allows you to reset a device back to the default factory
settings. Reset includes resetting the devices IP address.
The formula for the Reset command is as follows:
Command + Address + Number + [Enter]
1. For example, to reset device (192.168.0.95), type the following:
reset a192.168.0.95 [Enter]
2. For example, to reset the Receiver, type the following:
reset [Enter]
The following tables show the possible values for the Reset command:
Command
Address
Number
The following table lists the available Reset commands:
Command Address
reset
reset
Note: 1. Each command string can be separated with a space.
2. Skip the Address and Number command strings to reset the local
Receiver.
reset Reset command
a Address command
xx Address number
xx: Receiver ID or IP address
Num
a xx
Chapter 12. CLI Commands
Description
Description
Description
Enter
[Enter] Reset address xx back to the
factory default settings
xx: Device ID or IP Address
[Enter] Resets the Receiver settings
Description
247