KVM over IP Matrix System User Manual
Item
Replace Device
Save
Cancel
178
Click Replace Device in the top left corner to replace an old
Receiver with a new one.* All settings are copied from the old
Receiver to the new Receiver. Before using this feature, connect
the new Receiver to the network. After clicking Replace Device,
use the drop-down menu to select the new Receiver where the
settings will be applied.
Note:
1. This option only appears when a Transmitter is offline.
2. This feature can be used for both Receivers and
Transmitters. Replacement should be carried out on a
similar model.
Click Save to save changes to the properties.
Click Cancel to exit without saving.
Description