ATEN KE6900ST User Manual page 181

Item
Basic Device Name: Enter a name for the Transmitter.
Description: Enter a description for the Transmitter.
Location: Use the drop-down menu to select a Location for the
device. Locations filter the Transmitters seen on the settings page.
Mode: Use the radio button to select how the Transmitter will be
installed and managed:
Enable Media: Select which source type the Transmitter can
stream: Video, Audio, USB and RS232.
Audio Input: Use this option to select the Transmitter's audio
source signal: HDMI, Analog, or Auto. This setting should reflect
the audio setting configured on the computer.*
Note: The Audio Input option is only available on KE devices with
HDMI capabilities.
Select Extender mode for simple one-to-one (Transmitter to
Receiver) setups that are managed at the Receiver's OSD
menu.
Select Matrix mode to manage devices and connections over
the LAN from the KE Matrix Manager software. This mode is for
advanced administration of Transmitter and Receiver
connections configured within the KE Matrix Manager Web GUI.
Chapter 6. System Status
Description
163