Intelligent Dual Video Output Management - ATEN KE6900ST User Manual

Chapter 6. System Status

Intelligent Dual Video Output Management

The Intelligent Dual Video Output Management feature allows a Dual Display
Transmitter (KE6940T) to group each video output (DVI:1 and DVI:2) into
two separate Virtual Transmitters that can be accessed from different
Receivers. Receivers can switch between and connect to both Virtual
Transmitters independently with the Access Type determining which Receiver
has control (see page 171).
To use this setup, install the KE devices as shown below and create two Virtual
Transmitters, selecting DVI:1 and DVI:2 as the KVM source for each Virtual
Transmitter.
When connecting to either of the two Virtual Transmitters in the setup shown
above, the mouse cursor may reside on the main or extended dual display
screen, out of view. Therefore even if you have control of the mouse it may not
be visible. To bring the mouse cursor into view on either of the dual display
screens, first enable Boundless Switching (see Boundless Switching, page 183)
and then use the hotkey F8+F9.
169