Ke Matrix Manager Software Install - ATEN KE6900ST User Manual

KE Matrix Manager Software Install

The following are instructions to install the full version of the KE Matrix
Manager software on a primary or secondary computer. For software
requirements, see Software, page 6.
1. Insert the USB license key into a USB port on your computer.
Note: If you have more than 8 KE Series devices in your setup, a second
USB license key is required to install KE Matrix Manager on a
secondary computer.
2. Double click the KEMatrixManagerSetup file to start the setup. When the
Introduction screen appears, click Next.
3. The License Agreement appears:
Chapter 4. Software Installation
135