ATEN KE6900ST User Manual page 200

KVM over IP Matrix System User Manual
Item
Lock / Unlock
Layout Selection
Location
182
Click the monitor to Lock the (2) bezel settings, so that
when one size is changed they all change.
Click the monitor to Unlock the (2) bezel settings, so that
each size can be set independently.
+
X
Click or to add or remove additional layouts to the
Video Wall. The options listed here will appear in a drop-
down menu for the Video Wall, allowing you to quickly
choose different layouts from the Receiver settings page.
Arrows below the Layout Selection box allow you to
move up or down in the list.
Three layout templates are available for quick setup. The
Videowall and Splitter options can not be changed but
allow you to select the Receivers. These three layouts
can not be deleted.
Video Wall provides a basic full screen layout where
one Transmitter connects to multiple Receivers to
display the video together as one full screen.
Splitter provides a layout that connects a Transmitter
to multiple Receivers that show the same video
displayed on separate screens independently.
Customized provides a basic full screen layout that
can be configured into groups (see Group below) as
desired.*
Note: When using the KE6940R in Customized layouts,
only the KE6940's first video port will display video
because each port's video source is independent. When
using the KE6940R in Video Wall or Splitter layouts both
video ports will display video.
Use the drop-down menu to select a location for the
Video Wall or leave it Unallocated. See Location,
page 160, for details.
Description