ATEN KE6900ST User Manual page 227

Note: If this method is used, the LDAP schema for MS Active Directory
must be extended. Without schema – Only the Usernames used on
the KE Manager are matched to the names on the LDAP / AD server.
User privileges are the same as the ones configured in the KE
Manager.
Without schema – Only the Usernames used on the KE Manager are
matched to the names on the LDAP server. User privileges are the
same as the ones configured in the KE Manager software.
Without schema – Only Groups in AD are matched. User privileges are
the ones configured for the groups he belongs to in the KE Manager.
Without schema – Usernames and Groups in AD are matched. User
privileges are the ones configured for the User and the Groups in the
KE Manager.
TACACS+ Settings:
Enable TACACS+ and enter the following information:
Preferred TACACS+ Server
Preferred TACACS+ Service Port
Shared Secret 1
Alternate TACACS+ Server
Alternate TACACS+ Service Port
Shared Secret 2
Chapter 7. System Settings
209