Led Display; Authentication Lock (Ke6910 / Ke6912 Only) - ATEN KE6900ST User Manual

LED Display

Both the Transmitter and Receiver have front panel LEDs to indicate their
operating and power status, as explained in the table below:
LED
LAN
Power
Local
Remote

Authentication Lock (KE6910 / KE6912 only)

The KE6910/KE6912 extenders feature the Authentication Lock function.
When accidental power cut happens, the function allows the user to retain his/
her settings as was shown before the power cut. The user keeps the same
authentication and display.
This function can be configured in General on page 199.
This LED indicates the network status.
Lights when connected to the LAN and blinks when the Ethernet
connection is active:
Orange: 10 Mbps
Orange + Green: 100 Mbps
Green: 1000 Mbps
Off when not connected to the LAN.
Lights blue when the unit is powered on.
OFF when power is off.
Lights green to Indicate the Transmitter has KVM focus of the
computer
Lights green to Indicate the Receiver has KVM focus of the
computer.
Chapter 2. Hardware Setup
Indication
101