ATEN KE6900ST User Manual page 226

KVM over IP Matrix System User Manual
To allow authentication and authorization for the KE Manager via LDAP /
AD, refer to the information in the table, below:
Item
Enable
Enable SSL
LDAP Server IP
and Port
Timeout
Admin DN
Admin Name
Password
Search DN
On the LDAP / AD server, Users can be authenticated with any of the
following methods:
With MS Active Directory schema.
208
Put a check in the Enable checkbox to allow LDAP / AD
authentication and authorization.
Put a check in the Enable checkbox to allow SSL connections.
Fill in the IP address and port number for the LDAP / AD server.
You can use the IPv4 address, the IPv6 address or the domain
name in the LDAP Server field.
For LDAP, the default port number is 389.
Set the time in seconds that the KE Manager waits for an LDAP /
AD server reply before it times out.
Consult the LDAP / AD administrator to ascertain the appropriate
entry for this field. For example, the entry might look like this:
ou=kn4132,dc=aten,dc=com
Key in the LDAP administrator's username.
Key in the LDAP administrator's password.
Set the distinguished name of the search base. This is the
domain name where the search starts for user names.
Action