ATEN KE6900ST User Manual page 129

Item
Enable Media Select which type of media the Receiver can stream from
Transmitters: Video, Audio, USB, and RS232. For KE8950
Series models, use the radio button to set the source of the
audio signal: HDMI, Analog, or Both.
Manager Set the IP address and Port number of the computer running
Address the KE Matrix Manager software. The default port number is
9110.
Beeper Check this box to allow the Receiver to beep when configuration
changes are made to it.
Touch Screen Use this button to calibrate the surface of a USB touch screen
Calibration connected to the unit. When the calibration screen appears,
touch the flashing
complete.
USB Mode Select the type of USB device you will connect to the USB ports:
Virtual Media: Only select this option if you are plugging a USB
disk into the USB ports. This will give you the highest data
transfer speeds but will not allow other USB devices plugged
into the USB ports to work. When Receivers connected to the
same transmitter mount or unmount USB disk drives, the
keyboard and mouse operations will experience a brief delay.
Transmitters can support up to 12 virtual media connections at
the same time (keyboard/mouse included).
vUSB (Generic USB device): Use this option to plug USB
peripherals* into the USB ports. This option also allows a
keyboard and mouse with special functions to plug into the USB
ports for console use. Use this only if the special functions of the
keyboard or mouse are required but do not work when plugged
into the console ports. When the keyboard and mouse are
plugged into the USB ports, they will not work within the OSD
menus. To work within the OSD menus, the keyboard and
mouse must be plugged into the console ports. KE6900ST/
KE8900ST/KE9900ST transmitters do not support vUSB
(Generic USB Device) mode. In this mode, KE6900/KE6940
transmitters supports up to 2 USB connections; and KE8950/
KE8952 transmitters support up to 5 USB connections
(keyboard/mouse excluded).
Encryption: Check this box to encrypt USB drives plugged into
the USB ports.
Note: This USB port does not support isochronous endpoints,
therefore USB peripherals that stream audio or video data, such
as speakers or webcams, will not work.
Receiver Use the Keyboard Country Code drop-down menu to select the
Keyboard Receiver's language keyboard for use in the OSD.
Chapter 3. OSD Operation
Description
+
symbol at each corner until the process is
111