5. Under Assign IP Address select an option to configure the network
settings, then click Next.
Item
IP Range
DHCP
Use Original IP Setting
6. Use the Naming Rule radio button to create a naming convention (Title +
Number); or Use Original Name to use the name currently configured on
the Transmitter/Receiver, then click Next.
Chapter 5. Browser / Telnet Operation
Select the IP Range radio button to enter a series of
static IP addresses to assign to the Transmitters/
Receivers that you are adding.
Select the DHCP radio button for dynamic IP address
assignment.
Select this radio button to use the IP address currently
configured on the Transmitter/Receiver.
Description
147