Connections - ATEN KE6900ST User Manual

KVM over IP Matrix System User Manual

Connections

When Receivers connect to Transmitters, they appears in the Connections
panel. There are two columns – each lists either Transmitters or Receivers. The
columns can be swapped by click the TX-RX or RX-TX button. Devices in the
left column can be clicked to display their connection to devices, shown in the
right column. Connections, shown in the right column, can be disconnected by
X
clicking the over the connection diagram.
Item
Left Column
Right Column
Transmitter
Receiver
222
On the heading bar under Connections, click this icon to
change the sort order of the Transmitters or Receivers
listed in the left column.
Click a device in the left column to view its connection in
the right column. A diagram to its connected device(s)
appears in the right column.
The right column displays a connection diagram when a
device in the left column is selected. Move the mouse
cursor over the diagram and click
devices. This column also shows the user and access
type (Exclusive, Occupy, Share, View Only) used to
establish the connection.
Lists Transmitters that are online and connected to
Receivers.
Lists Receivers that are online and connected to
Transmitters.
Click to view Transmitter to Receiver connections. This
will list Transmitters in the left column so that they can be
selected to view their connection diagram, shown in the
right column.
Click to view Receiver to Transmitter connections. This
will list Receivers in the left column so that they can be
selected to view their connection diagram, shown in the
right column.
Description
X
to disconnect the